Lilynet Logo Lilynet

/dn42
ewr1 anycast

Our presence on dn42 are:

  • AS number: AS4242421919 (“lilynet”)
  • IPv4 range: 172.21.89.64/27
  • IPv6 range: fd11:4514:1919::/48

You can view this AS on the dn42 registry explorer.

All nodes are hosted on Vultr. I use BIRD 2 as the BGP daemon, WireGuard for tunneling and internal meshing, and babeld for internal route propagation.

Peering

Note that all peering information will be stored in a publicly accessible GitHub repository.

To peer, you can contact me via any method listed on my homepage. Peering policy (in RFC 2119 parlance):

Please include all the following information in your initial request, so I can set up the peering without extra back and forth.

  • Your AS number
  • The lilynet node you want to peer with
  • Your node’s WireGuard endpoint (IP/hostname + port)
  • Your node’s WireGuard public key
  • Whether you want to use MP-BGP and IPv4 extended next hop
  • Your node’s IPv6 address over the tunnel (link-local recommended)
  • Your node’s IPv4 address over the tunnel

Specifically regarding your IPv4 address:

  • In the case of MP-BGP, I will not establish a BGP session on your IPv4 address — it is only used for routing.
  • In the case of MP-BGP + extended next hop, you may omit IPv4 entirely as it is not used in either BGP or routing.

All the information you will need to peer with me is listed below. All WireGuard ports are :4[xxxx] where [xxxx] is the last 4 digits of your AS number.

Nodes

Currently there are two nodes in this network.

US East / New Jersey (ewr1)

KeyValue
WireGuard Endpointewr1.dn42.dayli.ly:4[xxxx]
WireGuard Public KeyF6YGAEiF7VLd2r2DW/jX7vC8235b4DJf6HD29gRi6gg=
dn42 IPv4172.21.89.65
dn42 IPv6fd11:4514:1919:1::1
Link-local IPv6fe80::1919

US West / Silicon Valley (sjc1)

KeyValue
WireGuard Endpointsjc1.dn42.dayli.ly:4[xxxx]
WireGuard Public KeyyOt9PIXDa4pzAE+XMzDv7J+CYO2qf53fnF9MvLy4iQ8=
dn42 IPv4172.21.89.66
dn42 IPv6fd11:4514:1919:2::1
Link-local IPv6fe80::1919